When themes are set and the upper and lower values for a set of themes have been defined, the auto themes button starts with the non linear interpolation between the minimum and maximum value, it would be great if this interpolation could initially be done linearly and if the other options came secondary to this.

Currently it is possible to add lateral inflows to a river via subcatchments, if we could also do this directly from event data or TSDB that would be great.

Provide a function to easily assess cross sections of the ground model, similar to the XPSWMM function

Infoworks - ICM

Contours with labels to be shown on ground model

When updating bank lines from ground model it would be useful to have an option was available to only update the interpreted points, therefore retaining vertices heights from cross sections and surveyed points. Or an option to easily delete the interpreted points, so they can be updated.

Infoworks ICM

As a user, I would like to have AutoCAD drawing files as a part of my map control (InfraWorks ICM background) so I can see my AutoCAD Civil 3D design.

We only allow the user to import the active scenario in InfoSewer. If a user does not have InfoSewer then he or she must guess which is the active scenario. It would better to have a dialog to allow the user to import their selected and needed scenario.

Enhance/Add support to the GIS Layer Control to access the new OS Open Data API's WMTS. It appears at the minute you can only add WMS layers.

https://osdatahub.os.uk/

Choose which Windows are used for Tile Horizontally or Tile Vertically. If a Geoplan and two Long Sections are open, we want to tile only the Long Sections, so a selection for the tiling would be useful.

When object entries are updated from ground model, it would be good if the previously used settings could be remembered the next time the dialog is triggered.

When a cross section is extended, the roughness values are not populated automatically when it is probably valid in a significant number of cases to carry forward the existing roughnesses of the cross section end points.

conduit shape ID "Oval" only allows Height > With. So for "horizontally" wide oval conduits a new conduit shape has te be defined. It would be practical if the standard "Oval" also allows a with greater than the hight.

We need to be able to automatically run scripts at the completion of our forecasts. it would be extremely helpful if we could have these scripts as part of the manifest workflow so that they started as soon as the results export task completed.

I would like to use radar rainfall like NEXRAD and spatially correct it to my rain gauge network locally before applying the rainfall in my model.

We've a lot of work at the moment modelling the failure of tailings dams. Tailings dams typically have material that acts in a non-Newtonian manner. To effectively model these sorts of fluids would require the inclusion of additional fluid properties. The Bingham method (https://en.wikipedia.org/wiki/Bingham_plastic) has been successfully applied in other applications.

We use custom labels a lot in reporting how we model ancillaries, and for complex assets spend a long time adjusting labels so they don't overlap and do show up properly.
It would be great if a more "smart" label engine could be used so that labels don't overlap each other, and a few simple other rules e.g. as close to the object as possible, avoid line crossing, and automatically show any newly generated label within the current view extent.