Allow the user to choose the flood type of pond or storage nodes
Allow the user to choose the flood type of pond or storage nodes from a drop down as is the case for manholes. As opposed to the current state where the flood type depends on the relationship between the highest level entry in the storage array and the ground level of the node.
From help file: "Storage nodes or ponds can flood. If the highest level entry is below ground level, the pond is considered to have a roof at that level and is therefore sealed. If the highest level entry is equal to the ground level then any water above ground is lost from the system. If the highest level is above the ground level then water is stored in the node."