Storm Sewer & Flood Modeling
Welcome to the Innovyze Stormwater, Sewer, and Flood modeling feedback page.
13 results found
Export statistical template results automatically as part of the manifest.
Particularly CSO spill statistics - enabling models to be run maybe weekly with historical data, the statistics exported - spill nr, duration and particularly predicted volume. This data can then be analysed in tools outside of ICMLive. This data would significantly enhance the understanding of CSO spills by adding volume to the normal Event Duration Monitoring7 votes
Management of Siltation module within ICM Live
As part of our ICM Live system we use the Siltation module. While this creates a dynamic siltation on each pipe, there isn't an easy way to manage it. Once a pipe is cleaned we need to stop the live model and potentially apply all the dynamic silt levels to the conduits as if they were observed and restart the siltation module form scratch. We need a better way. Could we have a job created for PPM (as in InfoAsset) that would reset the dynamic value on specific pipes. This could be linked to InfoAsset?16 votes
Model results as TVD connectors
We'd like to have model results as an input in the TVD connectors. An example is where we have observed flows that we would like to use at a tributary and then switch to catchment flows when the observations run out. We know this can be done using a set up of sluices and dummy objects but it would be a lot more elegant to simply have the subcatchment as Input B. I'm sure there are plenty of other examples of where using model results as an input would be useful.19 votes
Updating a model in ICM Live is overly complicated and currently results in loss of data from previously ran simulations
The current process to update a model in ICM live is overly complicated and is currently not simple to grasp. This currently requires the removal of all runs from a particular manifest before you can remove and update the model being used. A simpler way to do this would be beneficial, including a methodology which does not require the removal of earlier simulations as this is not immediately obvious that this is a requirement . Ideally this process should be made easier in future releases. Thanks2 votes
ICMLive Viewer Licence
The ICM licence does not allow for the contents of Live groups to be seen. This has implications for the viewer licence. I would like to be able to access (but not edit) the contents of a live group. Can there therefore be an ICMLive Configuration Manager Viewer LIcence?2 votes
Application of design storms in ICMLive
We'd like to be able to predefine some design storms in ICMLive (note that this is NOT the same as design rainfall in ICM). The idea is that we'd have these storms that could be optionally applied by operators to see the likely effect of a rainfall event. Essentially we are looking for the same functionality that existed in FloodWorks.5 votes
Use Machine Learning to estimate subcatchment inflows to network
Allow users to skip parameterized subcatchment hydrology estimates which may become outdated over time and replace it with machine learning on measured data from TSDB.
Flow meter could train algorithm which learns to predict flows based on rainfall. This flow is then allocated to upstream contributing subcatchments.
As TSDB grows, flow forecasts potentially improve.2 votes
Export of simulation log files from ICMLive
We'd like the log file to be automatically exported as part of the live modelling workflows. This log file contains important information pertaining to the TSDBs that we would like to use in some additional post-processing. Could this be part of the manifest export process?2 votes
TVD connector input fields longer than 64 characters
The "input" fields for TVD connectors are currently limited to 64 characters. I have TSDB streams with names longer than 64 characters, and I would like to be able to use those streams as inputs to the TVD connectors.1 vote
Post processing scripts as part of a live simulation
We need to be able to automatically run scripts at the completion of our forecasts. it would be extremely helpful if we could have these scripts as part of the manifest workflow so that they started as soon as the results export task completed.11 votes
Alert Action Repetition Control - repeat action after alert has been active for Xnr runs
We have a model set up to process the EA's flood alerts and send out warnings when new ones become active. The model runs every 30 minutes, so we pick up the latest alerts and the repetition control is set to once so people don't become drowned in alerts. I would like to be able, if the EA alert was still active, to repeat this alert 24 hours later - so maybe have an additional repetition control column to repeat the alert after Xnr model runs. So in this case 48 runs would give me my daily repeat of the alert. This would of course be useful for other alert types, as the main cause of alerts being ignored, is the sheer number that can be received on a wet day.
We have a model set up to process the EA's flood alerts and send out warnings when new ones become active. The model runs every 30 minutes, so we pick up the latest alerts and the repetition control is set to once so people don't become drowned in alerts. I would like to be able, if the EA alert was still active, to repeat this alert 24 hours later - so maybe have an additional repetition control column to repeat the alert after Xnr model runs. So in this case 48 runs would give me my daily repeat of the…5 votes
Export results to CSV/Database with a more flexible selection list in ICMLive
In ICMLive, we can now export results to CSV/Database with a pre-defined selection list. In ICM, we can have a more flexible way.
For example if I hope to export results point (2D), initially I may have 1 million points. What we can do in ICM is, run a SQL to query points with sim.max_depth2d > 0.05, then save them to a selection list. We may only have 0.1 million points to export.
Can we have a similar function in ICMLive, which combines SQL and selection list?3 votes
Alert on river sections without having to make 1D results points
We'd like to create alerts on river sections without having to create either results points or having the reach split at the cross section in question2 votes
- Don't see your idea?