Can't currently map Max HL/1000. This would be more efficient/useful in some cases than mapping Max HL (feet). If your model has many segments, it is possible that very high head loss areas will not be flagged if only the HL is available.

When user has a lot of sensors they need to add to the Live Data Adapter, it is really hard to add one by one. We need a way to batch import the sensor using some kind of csv file.

In the InfoWater Pro (v3.5, update #3) report manager, the "Remove All" button only removes some of the reports.

It can be difficult to tell if UPC is attached to a pump without checking every time. It would be very helpful to have a way to show UPC, such as similar to live data.

Do you have an expounded example of each InfoWater Allocation Method with examples? It will help if a link is established to get directed to that documentation. For example; can you help me get directed to an example Closest Junction allocation method?

When inserting a new junction in an existing pipe, InfoWater Pro interpolates the elevation data between the two existing nodes to come up with a default elevation estimate. A useful setting option would prevent this from happening, and instead default to a 0.00 elevation.

ICM has the capability of the scenario modelling within the single network. H2Omap also had the same capability. Any possibility of having the same capability in WS pro?

I need a way to allocate demand from a meter (point meter) to the pipe (polyline) based on the lateral connection (polyline) at end points.

Keep in mind:
The features might not snap nor connect to pipes

This would speed up the process of model calibration, where I would be adjusting a pipe roughness, PRV or PS control and run the model after each adjustment. Instead of opening the run schedule and clicking run and then ok, a run button or function key would speed this up.

Currently in Test Feed window of Live Data Feed both 'Start Time' and 'End Time' default to now. It would be better if the 'Start Time' as in the past (e.g. today minus one day). That way when connect to live data from Pi or Scada some output would be produced. At the moment with the current defaults the user always have to modify the 'Start Time'.

I could always copy and paste attributes via simple keyboard commands (Ctrl+C and Ctrl+V) in classic InfoWater, but can no longer do that in InfoWater Pro. You can right click and select "Copy" or "Paste", but that takes longer. Bring back keyboard commands.

At this time the custom action buttons are only relevant to the database. As a user who has a number of SQL toolboxes which I use across multiple models it would be highly beneficial if these custom action buttons could be set up in the software so they were applicable to all models opened

There is massive interest in having a water quality model that shows pH, Nitrification, chlorine levels, age, and tracing in real time. Currently this is only possible for water age (the basic EPANET WQ does not allow for the source tracing and quality modeling we need).

Would be really nice to do these with IWLive with shorter duration Server runs (using the proceeding projection), as opposed to having to do 20 day runs in IWLive, export to InfoWater, then setup MSX there and run for another 20 days.

It is currently difficult to identify if a facility has a rule-based control. An improvement would be to access all the controls for a facility through the existing controls button. Clicking the controls button would open a single window with a tab for simple controls and a tab for logical controls.

As a user of InfoWorks WS Pro, I would like that MapXtreme was the default setting for the background management. I mean, in the the software download page it's called "InfoWorks WS Pro with MapXtreme", so it would be quite obvious that MapXtreme is the default setting... (Besides, in "InfoWorks ICM with MapXtreme", MapXtreme IS the default setting!)

As a user I want to be able to handle multi-solute water quality defining my own set of equations (same as EPANET MSX)

Add a date/time stamp for the last successful model run somewhere in the run manager window would be helpful. Once a run has been completed, it is possible for a user to make changes to the model which would affect the hydraulics, yet the stoplight still shows green/yellow. It's possible for a user to THINK they have completed a run with the latest changes despite their not being incorporated.

Would be good to see clearer version info on innovyze.force.com...
The old site innovyze.com/updates was better viz "for ArcGIS 10.3-10.7"

Like in ICM, if we can directly import data received from field tests or downloaded data using CSV or some other formats that will save lot of time in processing/creating into text formats.

Denver Water has a massive outage program that runs a minimum of 6 months per year. All outages are modeled. For nearly all outages, 2 valves are shut down for safety. Having the isolation trace in IWLive contain an option to trace to the 2nd valve would be really useful and make this process significantly easier!